Version

Slip-ring motors

The difference between a slipring motor and an ordinary asynchronous motor is the different constructed rotor. In the ordinary asynchronous motor, this is a short-circuited rotor, the rotor of a slipring motor is constructed with windings, shifted 120° to one another and the wires of the windings are connected to sliprings which are accessible from the outside through carbon brushes. In this type of machine, the start-up current and therefore also the torque can easily be regulated.

Both new and overhauld slipring motors are on stock at Van Bodegraven Electric motors. Our overhauld slipring motors are checked for defects, cleaned and new again. Also for overhauling or repairing your own slipring motor, please contact us.

sleepringankermotor
Type Power in kW RPM High voltage IP Version Brand
A 160-4C 2.50 2200 380Y 23 B3 ASEA
SH112 3.00 900 380 54 B3 VEM
SH112 3.00 900 380 54 B3 VEM
UZMKTF43-6 3.00 950 380 54 B5 Conz
FBI160MV8/PS 3.70 740 380 55 B3 Unilec
FBI160MVV8PS 3.70 740 380 55 B3 UNILEC
FBT160MV8 4.00 710 220 55 B3 Unilec
MRAA 16 5.00 955 500Y 43 B3 ASEA
SMH132M6 5.40 900 380 54 B3 VEM
24/14S4BH 5.50 1500 220 54 B3 Demag
ASH132MS-4 5.50 1360 380 55 B5 Heemaf
MA 160L 42-8 6.00 700 380Y 43 B3 ASEA
SGFU656S 6.00 920 220 44 B5 Liebherr
ASH132M4 7.50 1400 380 55 B5 Heemaf
1LT31666AA10 7.50 960 380 54 B3 Siemens
1LV3166 7.50 960 380 44 V1 Siemens
ILT4186B3180 7.50 750 380 54 B3 Siemens
MRAA 18 8.00 955 500Y 44 B3 ASEA
hOR 971-8D 8.00 715 380Y 44 B3 SIEMENS
AV3043V3 8.00 695 220 23 B3 Acec